l series ft touch screens www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l3 toggles nkks transparent touch screens are engineered to complement the application of choice while offering superior durability and fexibility. with options in multiple sizes, and choices of input by fnger, gloved fnger or stylus, we maintain a consistent focus on impeccable quality and value added solutions with the diverse needs of our customers at the forefront. whether an application requires the 5- or 4-wire technology, the features include metal tails (analog), contact reliability with a connector, and anr flm, eliminating many of the typical visual artifacts. the flm surface is non-glare and hard coated for ease of use and integrity of the surface. additional benefts of nkks 5-wire touch screens include: ? screens highly resistant to static electricity and noise pollution ? drift-free operation despite any temperature fuctuation ? greater touch point density translating to more precision and reduction of false actuations ? quicker response time 5-wire, 4-wire & digital solutions resistive touch screens ? wide range of available sizes ? custom solutions a specialty ? digital and analog solutions ? controllers available ? anti-newton ring (anr) technology ? design minimizes visual artifacts ? rohs compliant ? information kiosks ? industrial automation ? banking, exchange management systems ? broadcast ? offce automation distinctive characteristics applications ? medical equipment ? hand-held devices ? hospitality and restaurant ? gaming
series ft touch screens www.nkk.com l indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l4 toggles customization options parameter notes & options resistive analog touch screen 4-wire or 5-wire integrate lcd & touchscreen yes - no 5-wire - screen size diagonal inches standard 10.4, 12.1, 15 (min 10.4, max 19) 4-wire - screen size diagonal inches standard 5.7, 6.5, 8.4, 10.4, 12.1, 15 (min 2.5, max 19) data entry area mm x mm same as the dimensions of the display area of the lcd viewable area mm x mm same as the dimensions of the bezel opening of the lcd perimeter dimensions mm x mm tail type pcb standard, fpc option tail pitch 1.25mm is standard tail pins 8 is standard, 4 is option tail length 2 standard options: 65mm or 80mm tail base width 28.2mm is standard tail location left side is standard, non-std options top or bottom tail material carbon-coated silver is standard, option is copper-gold glass thickness 1.1 and 1.8mm are standard (note: total thickness = glass thickness + 0.3mm) hardcoat treatment standard anti-newton ring treatment standard optical transmission factor 80% is standard controller yes - no (no = customer will supply) communication usb or rs232 operating system windows 7 or windows xp
l series ft 5-wire touch screens www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l5 toggles ftas00-121a5 ftas00-104a5 ftas00-150a5 5-wire resistive analog touch screens optical light transmission 80% standard film options anti-glare, anti-newton ring standard electrical power level 5.5v dc x y resistive value 20 ~ 80? insulation impedance 10m? minimum @ 25v dc linearity 2% maximum (after adjustment made by control board or device driver) chattering time 10 milliseconds maximum mechanical touch activation force 1.47n available sizes 10.4, 12.1 and 15.0 durability surface hardness 2h (jis k5600) expected operational life writing: 50,000 minimum operations (ap - proximately 30mm movement with stylus) tapping: 10,000,000 operations minimum (using silicon rubber) environmental operating temperature range C20c ~ +70c (C4f ~ +158f) storage temperature range C40c ~ +80c (-22f ~ +158f) relative humidity +60c (+140f), humidity 90%, 240 hours 5-wire analog touch screens part number screen size in inches key area dimensions viewing area dimensions external dimensions panel thickness terminal detail 8 pin .049 (1.25mm) pitch ftas00-104a5 10.4 8.5 x 6.45 (215.9mm x 163.9mm) 8.66 x 6.61 (219.9mm x 167.9mm) 9.31 x 7.22 (236.5mm x 183.3mm) .083 (2.1mm) length 3.15 (80.0mm) ftas00-121a5 12.1 9.8 x 7.37 (249.0mm x 187.2mm) 9.94 x 7.50 (252.4mm x 190.6mm) 10.52 x 8.1 (267.1mm x 205.8mm) .083 (2.1mm) length 3.15 (80.0mm) ftas00-150a5 15.0 12.05 x 9.06 (306.1mm x 230.1mm) 12.19 x 9.19 (309.5mm x 233.5mm) 12.79 x 9.79 (324.8mm x 248.7mm) .083 (2.1mm) length 3.15 (80.0mm) note: see web site for dimensioned drawings for all 5-wire analog touch screens. general specifications for 5-wire part numbers & descriptions for 5-wire
series ft 5-wire touch screens www.nkk.com l indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l6 toggles a d b c e f g 2.36 (60.0) 2.76 (70.0) 3.15 (80.0) 1.11 (28.2) .197 (5.0) .394 (10.0) pin 1 .049 (1.25) .443 (11.25) ty p .020 (0.5) .031 (0.8) ty p pin 8 reinforcement film .012 (0.3) .083 (2.1) t ail contact side reinforcement film t op electrode bottom electrode reinforcement film t in plating ft as00-xxxa5 viewable area active area ul 1 8 ll lr ur ul, ll, ur, lr: bottom electrode t erminal sense: t op electrode t erminal general specifications for 5-wire 5-wire analog touch screen dimensions part number screen size in inches dim a dim b viewable area dim c active area dim d dim e viewable area dim f active area dim g center of active area ftas00-104a5 10.4 9.31 (236.5) +/C0.3 8.66 (219.9) 8.50 (215.9) 7.22 (183.3) +/C0.3 6.61 (167.9) 6.45 (163.9) 4.79 (121.55) ftas00-121a5 12.1 10.52 (267.1) +/C0.3 9.94 (252.4) 9.80 (249.0) 8.10 (205.8) +/C0.3 7.50 (190.6) 7.37 (187.2) 5.37 (136.4) ftas00-150a5 15.0 12.79 (324.8) +/C0.3 12.19 (309.5) 12.05 (306.1) 9.79 (248.7) +/C0.3 9.19 (233.5) 9.06 (230.1) 6.49 (164.95) pins signal 1 ur 2 ul 3 nc 4,5 sense 6 nc 7 ll 8 lr
l series ft controller & drivers www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l7 toggles controller boards available for rs232c controller boards available for usb ? high quality and reliability ? easy integration replacing mouse functionality ? compatible with control board usb/rs2 ? device driver compatible with vista and windows xp operating systems ? interface: usb and rs232c ? high speed and accuracy ? built-in calibration function ? data function removal built in to eliminate noise ic & accessories 5-wire touch screen controller boards & drivers at713 receptacle connector this receptacle connector with code connects to rs232c communication of the controller boards. at714 receptacle connector at714 is a receptacle connector with code to connect to power source of the control boards. the ic is for use with the 5- and 4-wire transparent touch screens, and is available for those who prefer to design their own control - ler boards. when the screen is touched, it recognizes the position of the touch by the level of the analog voltage detected by the a/d. the a/d converter receives the value and sends a set of coordinate values as serial data or usb. see web site or contact factory for ic specifcations. nkk offers controller boards compatible with usb or with rs232c. see web site or contact factory for specifcations and technical data. for more details and dimensioned drawings of the accessories, go to the web site or call our engineering support personnel. ic ftcsu564 controller boards type part no. communication protocol 5-wire ftcs05b rs232c 5-wire FTCU05B usb see web site for dimensioned drawings or technical data for any of the controller boards and drivers. distinctive characteristics distinctive characteristics optional accessories
l series ft storage, handling & installation www.nkk.com indicators accessories supplement tactiles keylocks rotaries pushbuttons illuminated pb slides programmable rockers touch tilt l13 toggles below are some general precautions for the 5-wire & 4-wire touch screen devices. please check web site for complete documentation. installation (4-wire, 5-wire) ? do not pull on the tail. do not apply stress to the tail area. ? avoid vibration or shock. ? the touch screen mounting should not be loose. ? ensure there are no burrs around the edges of the case or housing that can cause false actuation. the edges of the case or housing should not enter the keying area. ? the case or housing and upper electrode should have a space of about 0.5 mm to accommodate expansion or shrinkage due to humidity variances. if a shock barrier is used do not press hard on the upper electrode area. any shock barrier should be installed more than 0.6 mm above the screen. ? to secure the touch screen, secure the lower portion with an item such as the lcd display panel. do not secure the upper electrode with double-sided tape or similar items to avoid stress that can damage the upper or lower electrode. ? in order to balance upper and lower pressure, an air vent may be installed. ensure that no liquid or oil will enter into the device. handling precautions (4-wire, 5-wire) ? when opening product, take precaution with up/down and front/back directions. glass edges are not chamfered, corners or edges can be sharp. wear gloves when handling the product. ? do not pick up the product by the tail or pull the tail area. ? use gloves or fnger cots to prevent fngerprints on surface. ? when handling the product, hold it outside of the viewing area. ? avoid stacking multiple products or placing other items on the product. ? remove protective flm after installation is completed. operating precautions (4-wire, 5-wire) ? only operate with fngers or a touch screen stylus. ? do not press hard with pen or similar objects between viewing area and key area. design precautions (4-wire, 5-wire) ? with analog type, resistive value change can dislocate the input area. input area can be calibrated with software. ? when installing on top of a lcd, noise from the display device can create misoperation. to avoid noise, implement actions such as grounding the display device frame. ? do not create software for two point touch as analog type will read the center point between two touch points. ? when used to draw a line, analog type will have a break at dot spacer. compensate for this with software. other precautions (4-wire, 5-wire) ? clean with a soft cloth and ethanol. do not use any cleaning agents other than ethanol. ? store product in original package and store at the temperature and humidity range specifed. ? do not store in an environment with acids or other corrosive gases or dew. ? not suited for use in critical control systems such as nuclear power, aerospace, medical or transportation equipment, without proper failsafe design consideration. handling precautions (5-wire) ? nkk warrantees the 5-wire touch panel when it is used with the nkk control board and driver. do not use third party control boards. ? 5-wire devices can misalign cathode position or touch position even after calibration. see web site for details. ? create a larger input area. if you have the input button at the edge of a screen, it might not operate properly. ? complete 9 point calibration with nkk driver. if more precision is desired, 25 point calibration is recommended. handling of controller board (5-wire) ? warranty for one year after delivery. we do not warrantee the controller board unless used with nkk touch panel. ? use arc prevention to protect device from static electricity. ? power source should be activated after host and touch panel are connected. ? when inserting connector cn1 and touch panel tail, be sure the slider of connector cn1 is pulled. do not pull more than 10 times. ? do not alter the product. ? do not use any commands other than the ones specifed in specifcations. ? place the product away from noise source (such as inverter from lcd operation) since tail can be affected by noise. ? if device driver (usb) does not work after installation, reboot the host computer while connected to the controller board. ? this product does not support suspended mode (usb). ? protocol of usb transmission is one frame per one transaction. ? contact factory if not using protocol above.
|
